Products

Home > ProductsTEMP Series is the Bismuth Telluride based thermoelectric modules for converting heat into electricity.

The module is designed and manufactured by our unique technology for converting heat source directly into electricity. The module is Bi-Te based thermoelectric module that can work at the temperature as high as 250 ºC. The thermoelectric module will generate DC electricity as long as there is a temperature difference across the module. The more power will be generated when the temperature difference across the module becomes larger, and the efficiency of converting heat energy into electricity will increase therefore. The module can be stuck with the high thermal conductivity graphite sheet on its both sides of the ceramic plates or apply thermal grease or other heat transfer compound when you install the module. The hot side of the module which marked “Hot Side” should be attached to the heat source.

TEMP Series Thermoelectric Power Module

TEMP1-0725-0.15

  • Size: 50 mm x 50 /55mm
  • Open circuit voltage: 2.8 volts
  • Matched load output resistance: 0.7 ohms
  • Matched load output voltage: 1.4 volts
  • Matched load output current: 2.4 amperes
  • Matched load output power: 3.35 watts
  • Heat flow across the module:55 watts

  • Heat flow density:2.2 W· cm-2

downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEMP1-08318-3.5T295

  • Size: 21 mm x 18 mm
  • Open circuit voltage: 2.4 volts
  • Matched load output resistance: 6.9 ohms
  • Matched load output voltage: 2.4 volts
  • Matched load output current: 0.35 amperes
  • Matched load output power: 0.84 watts
downloadSpecification Sheet Download

downloadPower Module Installation Notes

If you did not find thermoelectric module that meets your requirements, we are ready to design the one at your request.